Resideck Ultracrete is a rapid curing, resin rich, three pack Epoxy Screed with exceptional resistance to aggressive acids, solvents and alcohols e.g. 96-99% Sulphuric acid, Methyl Ethyl Ketone and Methanol.
Resideck Ultrascreed is a three pack Epoxy Resin based screed/render designed for application at 4-6mm thicknesses.
Resideck Ultraprime has been developed for use as aprimer to be used in conjunction with Resideck Ultracrete, and Ultrascreed.
Rapid setting concrete which allows road opening in one hour under normal conditions. Typical applications include the installation of road furniture, barriers and stanchion posts. Best Uses
- Concrete repairs to accept foot and vehicular traffic
- Forming of new pavement areas
- Re-instatement of deteriorated pavement areas
- Rapid repairs to roadways and runways
- Structural support systems
Sikalastic 152 is a 2-component, crack-bridging, fibre-reinforced cementitious mortar, with low elastic modulus with special additives for waterproofing and protection of concrete subgrades subject to flexural strain.
Mapegrout Hi-Flow is a ready-mixed mortar in powder form composed of highly resistant cements, selected aggregates, special admixtures and synthetic fibres prepared according to a formula developed in the MAPEI Research & Development Laboratories. Ideal in the repair of structures where particular thicknesses and the state of deterioration require the use of high flow mortars.
Curing Membrane WB is a specially formulated, water based Curing compound utilising advanced acrylic copolymers, which is designed for use with the Flexcrete Repair & Protection System. It is non-degrading, enabling it to be used externally as a sealer or readily overcoated with specialist Membranes from the Flexcrete range.
Cemprotec EF Primer is used to stabilize and seal cementitious and asphalt floors prior to the application of the Cemprotec range of cementitious coatings and mortars. It can overcome some inadequacies in surface preparation and helps minimize the risk of out-gassing from the substrate.
Resideck Polyester Mortar is a versatile, rapid curing, high strength, two pack mortar suitable for many applications in building and civil engineering. The product consists of a low viscosity unsaturated polyester resin BASE component, and a FILLER component consisting of graded minerals and catalyst.
Polyester Concrete is a polyester resin based material suitable for the repair, surfacing, jointing and bedding of concrete, brickwork and masonry. The product is supplied as a two pack system ready for on site mixing, consisting of a tin of base resin and a bag of catalysed filler.
Polyester Mortar is available in two grades, Summer and Winter, supplied as two component factory batched products. Component one is a polyester resin and component two is a catalyzed filler specially designed to both fill and harden the resin mortar.
Resideck Epoxy Concrete is a versatile, trowel applied, three component Epoxy resin-based, deep section screed/mortar. The product is supplied in a ‘natural’ or concrete grey colour, and may be sealed or topped with any of the range of Resideck Epoxy coatings or sealers as required.