We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New
PPG - Sigma EP 112 Miocoat - Epoxy Coating
  • PPG - Sigma EP 112 Miocoat - Epoxy Coating

PPG - Sigma EP 112 Miocoat - Epoxy Coating

Review (0)
£64.29
Tax excluded
£77.15 Tax incl.

PPG - Sigma EP 112 Miocoat - Epoxy Coating is a durable, two component, high solids, micaceous iron oxide, pigmented polyamine, cured recoatable epoxy build coating for steel and concrete structures.

Size :
Colour :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Sigma EP 112 Miocoat - Epoxy Coating is a durable, two component, high solids, micaceous iron oxide, pigmented polyamine, cured recoatable epoxy build coating for steel and concrete structures.

Features

  • Good adhesion characteristics for subsequent coats
  • Free from lead- and chromate-containing pigments
  • Excellent durability
  • Easy application, both by airless spray and brush
  • VOC compliant
  • Resistant to temperatures up to 200°C (390°F) in dry atmospheric exposure conditions
  • Approved Network Rail RT 98 item 7.2.1
  • Registered as Highway Agency item 112

Recommended Substrate Conditions and Temperatures

Substrate conditions

  • Steel; blast cleaned to ISO-Sa2½

Substrate Temperature & Application Conditions

  • Substrate temperature during application and curing should be above 5°C (41°F)
  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
  • Relative humidity during application and curing should not exceed 85%

Instructions for Use

Mixing ratio by volume: base to hardener 80:20 (4:1)

  • The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
  • Adding too much thinner results in reduced sag resistance and slower cure
  • Thinner should be added after mixing the components

Application

Air spray

Recommended thinner

PPG Thinner 91-92

Volume of thinner

10 - 15%, depending on required thickness and application conditions

Nozzle orifice

1.5 – 3.0 mm (approx. 0.060 – 0.110 in)

Nozzle pressure

0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

Airless Spray

Recommended thinner

PPG Thinner 91-92

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

Approx. 0.48 – 0.58 mm (0.019 – 0.023 in)

Nozzle pressure

15.0 MPa (approx. 150 bar; 2176 p.s.i.)

Brush/roller

Recommended thinner

PPG Thinner 91-92

Volume of thinner

0 – 5%

Cleaning Solvent

Thinner 90-53

PPG Paints
PPG-SE1M

Specific References

No customer reviews for the moment.

Write your review
PPG - Sigma EP 112 Miocoat - Epoxy Coating

You might also like

4 other products in the same category:

arrow_back
arrow_forward
PPG - Sigma EP 112 Miocoat - Epoxy Coating

PPG - Sigma EP 112 Miocoat - Epoxy Coating

£64.29
Tax excluded
£77.15 Tax incl.