We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    PPG - Sigma EP 110 Primer

    Review (0)
    £80.30
    Tax excluded
    £96.36 Tax incl.

    PPG - Sigma EP 110 Primer is a two component zinc phosphate blast primer & sealer that has excellent rust preventing properties in industrial or coastal atmospheres.

    Size :
    Standard Colours :
    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    PPG - Sigma EP 110 Primer is a two component zinc phosphate blast primer & sealer that has excellent rust preventing properties in industrial or coastal atmospheres.

    Features

    • Cures at temperatures down to 5°C (41°F)
    • Excellent adhesion to steel
    • Epoxy blast primer for steel
    • Registered as Highway Agency item 110
    • Approved Network Rail RT 98 item 7.1.2

    Recommended Substrate Conditions and Temperatures

    Substrate conditions

    • Steel; blast cleaned to ISO-Sa2½, blasting profile 50 – 100 µm (2.0 – 4.0 mils)
    • Galvanized steel; pre-treated with Sigma Etch

    Substrate Temperature & Application Conditions

    • Substrate temperature during application and curing down to 5°C (41°F) is acceptable
    • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
    • Relative humidity during application and curing should not exceed 85%

    Instructions for Use

    Mixing ratio by volume: base to hardener 75:25 (3:1)

    • The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
    • Adding too much thinner results in reduced sag resistance and slower cure
    • Thinner should be added after mixing the components

    Application

    Air Spray

    Recommended thinner

    THINNER 91-92

    Volume of thinner

    0 - 5%, depending on required thickness and application conditions

    Nozzle orifice

    1.5 – 3.0 mm (approx. 0.060 – 0.110 in)

    Nozzle pressure

    0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

     Airless Spray

    Recommended thinner

    THINNER 91-92

    Volume of thinner

    0 - 5%, depending on required thickness and application conditions

    Nozzle orifice

    Approx. 0.43 - 0.58 mm (0.017 - 0.023 in)

    Nozzle pressure

    15.0 MPa (approx. 150 bar; 2176 p.s.i.)

     Brush/roller

    Recommended thinner

    THINNER 91-92

     Cleaning Solvent

    THINNER 90-53



    PPG Paints
    PPG-SE1P

    Specific References

    No customer reviews for the moment.

    Write your review
    PPG - Sigma EP 110 Primer

    You might also like

    4 other products in the same category:

    arrow_back
    arrow_forward

    PPG - Sigma EP 110 Primer

    £80.30
    Tax excluded
    £96.36 Tax incl.