We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New
PPG - Sigmadur 540 - High Gloss Epoxy Finish
  • PPG - Sigmadur 540 - High Gloss Epoxy Finish

PPG - Sigmadur 540 - High Gloss Epoxy Finish

Review (0)
£105.56
Tax excluded
£126.67 Tax incl.

PPG - Sigmadur 540 - High Gloss Epoxy Finish (formerly Amercoat) is a two component high gloss VOC compliant epoxy acrylic finish

Size :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Sigmadur 540 - High Gloss Epoxy Finish (formerly Amercoat) is a two component high gloss VOC compliant epoxy acrylic finish

Features

  • Non-isocyanate
  • Excellent gloss and colour retention
  • Non-chalking, non-yellowing
  • Long pot life but quick drying
  • Can be recoated even after long exposure periods

Recommended Substrate Conditions and Temperatures

Substrate conditions

  • Compatible previous coat must be dry and free from any contamination
  • Surface of previous coat should be sufficiently roughened if necessary

Substrate Temperature & Application Conditions

  • Substrate temperature during application and curing should be above 5°C (41°F)
  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
  • Relative humidity during application and curing should not exceed 85%

Instructions for Use

Mixing ratio by volume: base to hardener 89.5:10.5

  • Adding too much thinner results in reduced sag resistance
  • The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
  • If required, thinner should be added after mixing the components

Air spray

Recommended thinner

THINNER 91-92

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

1.0 - 1.5 mm (approx. 0.040 - 0.060 in)

Nozzle pressure

0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

Airless spray

Recommended thinner

THINNER 91-92

Volume of thinner

0 - 5%, depending on required thickness and application conditions

Nozzle orifice

Approx. 0.38 – 0.46 mm (0.015 – 0.018 in)

Nozzle pressure

15.0 MPa (approx. 150 bar; 2176 p.s.i.)

Note:

In order to achieve the optimum finish and cosmetic appearance, the product may be thinned by 10% and applied using an air-assisted airless spray gun set up with a smaller tip size of 0.28 – 0.38 mm (0.011 – 0.015 in)

Brush/roller

Recommended thinner

THINNER 91-92

Volume of thinner

 0 – 5%

Cleaning Solvent

THINNER 91-92

PPG Paints
PPGSD540

Data sheet

Type
Epoxy
Size
4L & 20L
Colour
Tintable to many colours
Finish
Gloss
Coverage
10.8 m²/l for 50 µm (433 ft²/US gal for 2.0 mils)
For Use On
Metal
Application Method
Brush, Roller & Spray
Recoat Time (20°c)
8hrs

Specific References

No customer reviews for the moment.

Write your review
PPG - Sigmadur 540 - High Gloss Epoxy Finish

You might also like

4 other products in the same category:

arrow_back
arrow_forward
PPG - Sigmadur 540 - High Gloss Epoxy Finish

PPG - Sigmadur 540 - High Gloss Epoxy Finish

£105.56
Tax excluded
£126.67 Tax incl.