We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New
Mapei - Ultraplan Maxi 3230
  • Mapei - Ultraplan Maxi 3230

Mapei - Ultraplan Maxi 3230

Review (0)
Tax excluded
£50.00 Tax incl.

Mapei - Ultraplan Maxi 3230 is a Ultra-fast drying self-levelling compound for thicknesses from 3 to 30 mm.

Size :
Standard Colours :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

Mapei - Ultraplan Maxi 3230 is a Ultra-fast drying self-levelling compound for thicknesses from 3 to 30 mm.

Recommended Use

Ultraplan Maxi 3230 is used for levelling and smoothing differences in thicknesses from 3 to 30 mm on new or existing substrates, preparing them to receive all kinds of flooring where high resistance to loads and traffic is required. Ultraplan Maxi 3230 is especially suitable for areas subject to castor wheels and underfloor heating systems. Ultraplan Maxi 3230 is for interior use only.

Application Examples

  • Levelling screeds incorporating electric heating cables prior to laying ceramic tiles or resilient floors.
  • Levelling concrete slabs and cementitious screeds or Mapecem, Mapecem Pronto, Topcem or Topcem Pronto based screeds.
  • Levelling prepared anhydrite substrates. 
  • Levelling subfloors containing underfloor heating systems. 
  • Levelling existing concrete floors, terrazzo, ceramic, natural stone and floors.

Application Procedure

Preparation of the substrate Substrates must be dry, sound, free from dust, loose areas, paint, wax, oil, rust and traces of gypsum. Cement-based surfaces not sufficiently solid must be removed or, where possible, consolidated with Prosfas. Cracks must be repaired with Eporip. Cementitious substrates must be primed with Eco Prim T Plus diluted 1:2 with water or Primer LT as required. Anhydrite screeds must be mechanically abraded and can only be levelled with Ultraplan Maxi 3230 after being primed with Eco Prim T Plus diluted 1 : 2 after the surface has been mechanically abraded. On all non absorbent substrates apply Eco Prim Grip Plus after the surfaces have been cleaned with detergents and mechanically abraded. Level with Ultraplan Maxi 3230 after Eco Prim Grip Plus has dried completely. Preparing the mix Pour a 25 kg bag of Ultraplan Maxi 3230 into a bucket containing 4.5-4.75 l of clean water and mix with a low speed electric mixer to obtain an homogeneous, self-levelling, lump free mix. Larger quantities of Ultraplan Maxi 3230 can be prepared in suitable mixers. After 2-3 minutes of Ultraplan Maxi 3230 slackening, the mix should be re-stirred and then it is ready for use. The amount of Ultraplan Maxi 3230 mixed at any time must be used within 30-40 minutes (at a temperature of +23°C).


Apply Ultraplan Maxi 3230 in a single coat from 3 to 30 mm with a large metal trowel. To minimise aeration a spiked roller can be used. Ultraplan Maxi 3230 can also be applied with an automatic pressure pump. Due to its remarkable self levelling characteristics, Ultraplan Maxi 3230 immediately eliminates small imperfections (trowel marks, etc.). When laying underfloor heating systems follow the regulations for the preparation of the substrate and the heating commissioning procedure. On large surfaces follow all the movement joints present in the substrate and form control joints for every 50 m² approx.


Data sheet

Approx. 5m² at 3mm thickness
Application Method
Metal trowel or spiked roller

Specific References

No customer reviews for the moment.

Write your review
Mapei - Ultraplan Maxi 3230

13 other products in the same category:

Mapei - Ultraplan Maxi 3230

Mapei - Ultraplan Maxi 3230

Tax excluded
£50.00 Tax incl.