Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)
A rapid dry brilliant aluminium finish with excellent economical coverage for decorative and protective use on metalwork. Possessing heat resistance up to 250°C.
Suitable for use on ferrous and non-ferrous metals, wood and other similar absorbent materials.
Not suitable for applications where people may lean and rub on the surface of the coating due to the leafing properties of the aluminium.
Usage & Highlights
- Rapid dry
- Economical coverage
- Heat resistance up to 250°C
VOC Content (as supplied) : max 620g / litre
Volume Solids : 30% Mass Solids : 38%
Flash Point : 26ºC
Drying Time @ 20ºC
Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC
Hard [email protected] 20ºC
Over [email protected] 20ºC
1- 4 hours or 16 hours after application
Dry Film Thickness
15 - 25 μ
Wet Film Thickness
50 -85 μ
Approximately 15m² per 1 litre @ 20 μ DFT Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
All surfaces should be clean, dry and free from grease, rust, millscale, etc. Stir well before use but do not apply vigorous or excessive mixing as this could lead to damage to the leafing properties of the paint and consequent loss of brilliance. Apply as a thin film to prevent runs and sags.
Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.
- 5L & 20L
- 15 m²/L
- For Use On
- Application Method
- Brush & Spray
- Recoat Time (20°c)
No customer reviews for the moment.