We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    Maxkote M-CHEM 300

    Review (0)
    £218.77
    Tax excluded
    £262.52 Tax incl.

    Maxkote M-CHEM 300 is a high-build, solvent free Epoxy Novolac Coating providing excellent resistance to a wide range of concentrated acids and industrial chemicals.

    Size :
    Colour :
    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    Maxkote M-CHEM 300 is a high-build, solvent free Epoxy Novolac Coating providing excellent resistance to a wide range of concentrated acids and industrial chemicals.

    The material is suitable for a variety of applications including as a lining for bunding and secondary containment or as an internal lining for process equipment such as pressure vessels operating below 60°C.

    M-CHEM 300 – Acid Resistant Epoxy Novolac Coating is proven to protect against Sulfuric Acid 98%, Hydrochloric Acid 36%, Phosphoric Acid 75% and Hydrobromic Acid 40%.

    Typical Uses

    • Acid Resistant lining for Process Columns
    • As a Chemical Storage Tank Lining
    • To protect Bunds & Containments from chemical attack

    Application

    Steel

    • All oil and grease must be removed from the surface using an appropriate cleaner such as MEK or similar type solvent.
    • All surfaces must be abrasive blasted to ISO 8501/4 Standard SA2.5 (SSPC SP10/ NACE 2) minimum blast profile of 75 microns using an angular.
    • Once blast cleaned the surface must be degreased and cleaned using MEK or similar type solvent.
    • All surfaces must be coated before gingering or oxidation

    Concrete

    Existing Concrete

    • If the concrete surface is contaminated, pressure wash using clean water.
    • Once the concrete is dry, lightly abrasive blast or scarify taking care not to expose the aggregate.
    • Clean all dust and debris from the surface and take several moisture readings and prime with M-PRIME 100 – Low Viscosity Epoxy Concrete Primer or M-PRIME 104 – Damp Tolerant Concrete Primer dependant on moisture readings obtained.
    • Apply M-PRIME 100 or M-PRIME 104 at a target wet film of 150 microns, allow to cure before overcoating.
    • For very porous surfaces a second coat of primer may be required.

    New Concrete

    • Allow new concrete to cure for a minimum of 21 days. Lightly abrasive blast or scarify to remove any surface laitance.
    • Clean all dust and debris from the surface and take several moisture readings and prime with M-PRIME 100 – Low Viscosity Epoxy Concrete Primer or M-PRIME 104 – Damp Tolerant Concrete Primer dependant on moisture readings obtained.
    • Apply M-PRIME 100 or M-PRIME 104 at a target wet film of 150 microns, allow to cure before overcoating.
    • For very porous surfaces a second coat of primer may be required.
    Maxkote
    Max-MC300

    Specific References

    No customer reviews for the moment.

    Write your review
    Maxkote M-CHEM 300

    16 other products in the same category:

    arrow_back
    arrow_forward

    Maxkote M-CHEM 300

    £218.77
    Tax excluded
    £262.52 Tax incl.