We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    Maker Coating - Resuprime MVT

    Review (0)
    £74.16
    Tax excluded
    £88.99 Tax incl.

    RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. 

    Size: 5KG
    Colour:
    Clear

    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    Resuprime MVT (formerely known as R.S. Dampshield FH) can be used on a variety of underlayments including concrete and polymer screeds, as long as they are able to withhold water effect. It can even be applied to substrates with hygrometer readings of up to 97%.

    If your surface does not have a damp-proof membrane (DPM) or it has become ineffectual, be very careful to eradicate any hydrostatic pressure. This could cause the water flow to be directed elsewhere.

    The screed or floor you are applying Dampshield to should be at least 50mm thick if unbonded and strong enough that an even coating can be achieved. 

    RECOMMENDED USES

    • Concretes with no DPM
    • Where a DPM is ineffective
    • Polymer screeds
    • Cementitious underlayments

    Preparation

    New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm sq. is required.

    Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and make sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out with Resuscreed PA.

    Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with existing floor coating.

    Where Resuscreed PA is applied to masonry/concrete surfaces, care must be taken to ensure that surface preparation is thorough
    but does not disfigure the surface.

    Priming

    Where the relative humidity of a substrate exceeds 85% ERH, Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203.

    The number of coats to be applied is chosen in accordance with the following table.

    ERH% - Required Coating Thickness 
    75-85 - 1 coat of Resuprime MVT at 200 microns per coat 
    85-92 - 2 coats of Resuprime MVT at 200 microns per coat 
    92-97 - 3 coats of Resuprime MVT at 200 microns per coat

    For further information please refer to recommended individual product data sheets.

    Sherwin-Williams

    Data sheet

    Type
    Epoxy
    Size
    5KG
    Colour
    Clear
    Finish
    Gloss
    Coverage
    4.6 m²/KG
    For Use On
    Concrete
    Application Method
    Brush, Roller & Spray
    Recoat Time (20°c)
    8hrs
    Interior/Exterior
    Interior

    Specific References

    No customer reviews for the moment.

    Write your review
    Maker Coating - Resuprime MVT

    8 other products in the same category:

    arrow_back
    arrow_forward

    Maker Coating - Resuprime MVT

    £74.16
    Tax excluded
    £88.99 Tax incl.