Teknos - Timantti W - Steam Proof Film. A water-borne acrylate based moisture sealer that forms a steam-proof film for high moisture walls and ceilings. Ideal for high moisture rooms such as bathrooms or wet rooms walls and ceilings.

Best Uses

Teknos Timantti W is intended for use as a moisture barrier on walls and ceilings in moist internal areas and wet rooms that are painted with a top coat in the Teknos Timantti series. Suitable substrates include concrete, various types of building boards, glass fibre wall fabric glued with adhesive for moist areas, etc.

Ideal for walls and ceilings in bathrooms, kitchens, wet rooms, gyms, saunas, spas and more.

Surface Preparation

Clean new surfaces from dust and dirt.

Wash previously painted surfaces with RENSA SUPER paint cleaner.

Plastic wallpaper and ceramic tiles are all removed.

Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Smooth down the uneven surface with SILORA LW stopper for moist areas. Thereafter sand down the surface and remove the dust.

Application

Before use stir TIMANTTI W thoroughly.

Apply by brush or roller.

Apply the first coat with sealer diluted with water in the ratio of 1 : 1. The second coat is applied with undiluted sealer after a drying time of 1 - 2 hours.

Glass fibre wall coverings are glued with TIMANTTI W moisture sealer and thereafter primed once wet-on-wet with undiluted TIMANTTI W moisture sealer.

Top coating After a drying time of about 4 hours, top coating can be done with top coats of the TIMANTTI series. Must be overcoated within 12 hours.

Application Conditions

The surface to be painted must be dry.

During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80%.

Good ventilation during the application and drying period quickens the drying process.